Yaw Damper

(1/2) > >>

Brick:
Hi.
Im unable to run Yaw Damper with Bill's ERJ 145 4.01v panel. Any ideal?
Thanks!

Bill_Grabowski:
Krzysztof,

You have to check the aircraft.cfg file of the plane you are using to make sure all the autopilot settings are appropriate.

Bill

Brick:
I found this ,can You chack it please?

[autopilot]
autopilot_available=1
flight_director_available=0
default_vertical_speed= 1800.000
autothrottle_available= 0
autothrottle_arming_required= 0
autothrottle_takeoff_ga= 0
autothrottle_max_rpm= 90.000
pitch_takeoff_ga= 8.000
use_no_default_pitch=1
use_no_default_bank=1
default_pitch_mode=0
default_bank_mode=0
max_pitch=10.000000
max_pitch_acceleration=1.000000
max_pitch_velocity_lo_alt=2.000000
max_pitch_velocity_hi_alt=1.500000
max_pitch_velocity_lo_alt_breakpoint=20000.000000
max_pitch_velocity_hi_alt_breakpoint=28000.000000
max_bank=25.000000
max_bank_acceleration=1.800000
max_bank_velocity=3.000000
max_throttle_rate=0.100000
nav_proportional_control=9.000000
nav_integrator_control=0.250000
nav_derivative_control=0.000000
nav_integrator_boundary=2.500000
nav_derivative_boundary=0.000000
gs_proportional_control=9.520000
gs_integrator_control=0.260000
gs_derivative_control=0.000000
gs_integrator_boundary=0.700000
gs_derivative_boundary=0.000000
yaw_damper_gain=0.000000

Thanks

Bill_Grabowski:
Krzysztof,


I'm guessing that "yaw_damper_gain=0.000000" should be set to 1.0, and you should also check your [radios] section.

Bill

gavinbarbara:
Bill

What should the radios be?

Thanks.

Gavin

Navigation

Up one level

Next page