Flaps EMB

(1/2) > >>

CBL:
Ciao! I have finally install the EMB145 panel† but there's a problem with flaps. I dont see flap position in my EICAS , only shows Flap 45.

And I have installed both updates

Another problem is that my EMB didnt intercept the GS. Dont know about LOC 'cause as I saw the aircraft didnt intercept the GS I decide to disengage the AP

Bill_Grabowski:
Josť,

In your Aircraft.cfg file (for whatever aircraft you fly), under [Flaps.0] you need to have

flaps-position.0 = 00.900, 250.0
flaps-position.1 = 09.900, 250.0
flaps-position.2 = 18.900, 250.0
flaps-position.3 = 22.900, 250.0
flaps-position.4 = 45.900, 250.0

As far as intercepting the glideslope, you must first have intercepted the localizer, and the glideslope indicator must be showing - meaning it actually senses a glideslope being present. Not all localizers have glideslopes.

Bill

CBL:
Bill im Still having the problem about flaps
 
[flaps.0]
flaps-position.0 = 00.900, 250.0
flaps-position.1 = 09.900, 250.0
flaps-position.2 = 18.900, 250.0
flaps-position.3 = 22.900, 250.0
flaps-position.4 = 45.900, 250.0
damaging-speed=270
blowout-speed=300
lift_scalar=0.420
drag_scalar=0.750
pitch_scalar=0.000
system_type=0
type=1
span-outboard=0.500000
extending-time=20.000000

Bill_Grabowski:
Josť,

What do you see in the EICAS flap position window when you raise or lower the flaps? What does it show at 0 degrees, 9, 18, 22, and 45? Does it show 45 all the time? During flap transition do you see "---" to indicate flap movement?

Bill

CBL:
it shows only 0 position and 45, but I have to wait a bit to show (45)

the 9,18and 22 I see "- -"

Navigation

Up one level

Next page